Menu

HydroLogic Stealth RO Membrane 100 GPD

$109.00

Works with Stealth 150 or 300 GPD

 

Description

 

Stealth-RO100™ Membrane

    • 98+% PPM Rejection
    • Membrane Type: Thin Film Composite
    • Maximum Operating Temperature: 113°F (45°C)
    • Maximum Operating Pressure: 100 PSI
    • Maximum Feed Flow Rate: 2 GPM
    • Maximum Feed Water Turbidity: 1 NTU
    • Maximum Feed Sit Density Index (SDI): 5 SDI
    • Chlorine Tolerance: <0 PPM
    • Flow rates of RO systems are based on source water @ 65 psi / 77° / 500 ppm
    • Dimensions (H x W): 12″ x 2.125″
    • Weight: 0.472 lbs
    • Tariff: 8421990040

    THERE ARE TWO INDICATIONS AS TO WHEN TO CHANGE YOUR MEMBRANES

    1. Test the RO and source/inlet water to see what percentage of the inlet water’s PPM the 100™ is filtering out (rejection %). You should see approximately 98% of the inlet PPM’s being removed when the membrane is new. If the rejection % falls under an acceptable level (typically 90%) it’s time to change the membrane
    2. When the flow rate of the product water slows down significantly. This can also happen if your pre-filters are clogged. If you change your pre-filters and the product water still flows slowly then it’s an indication you need a new membrane. When it doubt contact HydroLogic

Additional information

Weight .3 kg
Dimensions 7 × 7 × 31 cm

Reviews

There are no reviews yet.

Be the first to review “HydroLogic Stealth RO Membrane 100 GPD”

Your email address will not be published. Required fields are marked *

0